1.Pickled HRC with trimmed edges,  having following specification:

C max 0.07%

Mn max 0.35%

P max 0.02%

S max 0.02%

Si max 0.035%

Al min 0.02%

N max 0.01%

Ti max 0.01%

Nb max 0.005%

1.8 x 1250 mm                       20.000 to            

2.0 x 1255 mm                       23.000 to         

TOTAL                                 43.000 to  

Quality equivalent DD11 ( if possible also DD14)  according EN 10111 Width tolerances:  -0/+2 mm Thecoils will be delivered with trimmed edges, the inner diameter of the coils 600 mm, outside diameter max 1800 mm and the weight aprox. 20to/coils.

2. Full hard material, having the dimensions

0,16X1000 mm         4.000   to

0,18X1000 mm         4.000   to

0,20X1000 mm          2.000   to

0.22x1000  mm         2.000   to            

0.25x1000   mm        5.000   to

0,25X1250 mm          5.000  to            

0.30x1000   mm        5.000   to  

0.35x1250   mm       15.000  to

0,40X1250  mm        15.000  to

0,45X1250 mm           3.000  to

TOTAL                  60.000 to  

Quality equivalent DC 01; Width tolerances:  -0/+2 mm The coils will be delivered with trimmed edges, the inner diameter of the coils 600 mm, outside diameter max 1800 mm and the weight aprox. 20 to/coils.

Looking forward in receiving your offer stating best price ( price to be understood CFR FO Constanta/Romania or CFR FO Galati/Romania), we thank you in advance.

(關(guān)鍵字：酸洗卷 軋硬卷 羅馬尼亞)